Processed at a relatively low temperature of 170°C (338°F), the densified material undergoes minimal thermal degradation, helping maintain high quality for recycling. It is formed into a flat profile with minimal warping and deterioration, making it easy to handle and store.
Dimensions: 140 × 500 × 50 mm (5.5 × 19.7 × 2.0 in.)
Weight: Approx. 1.5 kg (3.3 lb)
Pallet Weight: Approx. 500 kg (1,100 lb) when 16 × 20 pieces are stacked on one pallet
Foam Densifier RE-E201
Ideal for in-house EPS recycling.
A compact,
energy-efficient densifier designed
for small-scale operations.

Designed for high-quality output, operator safety, and everyday ease of use.
![]()
Foam is melted using an electric heater, reducing its volume by up to approximately 100:1.
Densification ratio varies depending on the expansion ratio of the material.
![]()
Densified material (Ingot) is automatically cut to a preset length for easier handling and storage.
![]()
Built-in air cooling eliminates the need for water cooling or additional cooling equipment.
![]()
With a warm-up time of just 5 minutes, operators can get back to work quickly after startup or breaks.
![]()
A compact heat source and activated carbon odor filtration help minimize odors and maintain a more comfortable working environment.
![]()
Hazardous areas are guarded to prevent operator access. Safety interlocks stop the machine and prevent operation when access covers are open.
Widely used for protective packaging, fish boxes, insulation, and cushioning applications.
Commonly used for food trays, takeout containers, and disposable food packaging.
Used primarily as rigid insulation boards for residential and commercial buildings.
A durable, lightweight foam used for automotive components, reusable packaging, and impact protection.
A flexible foam material widely used for protective packaging, cushioning, and industrial applications.
Interested in
the RE-E201 Foam Densifier?
Contact Us to Learn More.
The RE-E201 is a compact,
energy-efficient densifier ideal for in-house foam recycling.
If you're looking for an efficient solution for bulky foam waste,
contact us to learn how the RE-E201 can help.
![]()
Densifying foam by up to 100:1 significantly reduces storage and transportation costs.
It can also eliminate the cost of outsourcing foam waste disposal. Depending on the volume and type of foam processed, the value of the densified material may even offset operating costs.
![]()
Simple push-button controls make the machine easy to operate. Densified material (Ingot) is automatically formed and cut to a consistent size, allowing operators of varying experience levels to use the machine with ease.
![]()
With a warm-up time of just five minutes, operators can get to work quickly. An activated carbon odor filtration system helps maintain a comfortable work environment, while easy access to heaters and other key components simplifies routine maintenance.
Beyond material quality and machine performance,
we design our equipment with the operator
in mind—making everyday operation safer,
easier, and more comfortable.
Simple push-button controls make everyday operation easy and straightforward. Densified material (Ingot) is automatically formed and cut to a consistent size, minimizing operator effort.
With a warm-up time of just five minutes, operators can get to work quickly after startup or breaks. A built-in air-cooling system also eliminates the need for water cooling of the densified material.
A compact heat source helps minimize heat, while an activated carbon odor filtration system helps reduce odors for a more comfortable work environment.
We strive to make a positive impact
on the recycling industry through engineering.
This commitment guides the development of every YAMAMOTO
recycling machine,
built around three core principles.
Interested in
the RE-E201 Foam Densifier?
Contact Us to Learn More.
The RE-E201 is a compact,
energy-efficient densifier ideal for in-house foam recycling.
If you're looking for an efficient solution for bulky foam waste,
contact us to learn how the RE-E201 can help.
The compact RE-E201 delivers a processing
capacity of 20 kg/h (44 lb/h) while minimizing floor space.
Designed for safer, easier operation.
Click each component to view details.
1
The wide feed hopper accommodates approximately 5–10 EPS boxes at a time. Its continuous-feed design helps keep the work area organized while minimizing the space required for material loading.
2
YAMAMOTO’s uniquely designed shredder blades efficiently shred a wide range of EPS products, including fish boxes, protective packaging, and trays.
3
Ready in just 5 minutes. Densification at 170°C (338°F) with minimal heat exposure helps reduce thermal degradation and maintain material quality.
5
A wheel sensor monitors the discharged densified material, which is automatically cut into approximately 50 cm. (20 in) lengths.
6
Activated carbon filtration helps reduce odors generated during densification, creating a more comfortable work environment. The exhaust air is also used to cool the surface of the densified material.
7
Provides precise temperature control. If an issue occurs, a warning light and audible alarm alert the operator, while a message on the display indicates the issue.
8
A manual control switch inside the panel allows individual motors to be operated independently during maintenance.
Interested in
the RE-E201 Foam Densifier?
Contact Us to Learn More.
The RE-E201 is a compact,
energy-efficient densifier ideal for in-house foam recycling.
If you're looking for an efficient solution for bulky foam waste,
contact us to learn how the RE-E201 can help.

RE-E201 / RE-E502 (X)
| Product | Foam Densifier | |
|---|---|---|
| Model | RE-E201 | |
| Machine Dimensions |
Length | 1,265 mm (49.8 in.) |
| Width | 1,145 mm (45.1 in.) | |
| Height | 1,525 mm (60.0 in.) | |
| Machine Weight | 650 kg (1,433 lb) | |
| Power Requirement | 6.66 kW (3-phase, 200 V) | |
| Processing Capacity | 20 kg/h (44 lb/h) | |
| Densification Method | Electric Heating | |
| Compatible Materials | EPS, PSP, XPS, EPP, EPE | |
| Odor Control | Activated Carbon Filtration | |
● Processing capacity varies depending on the material and foam expansion ratio.
● Processing capacity may differ from the specifications shown above when processing high-expansion foam, trays, or wet materials. Please contact us for details.
● Specifications, illustrations, appearance, colors, markings, and other details are subject to change without notice for product improvements.
What are the benefits of densifying expanded polystyrene (EPS)?
EPS is lightweight but bulky, making it inefficient to transport and costly to store and dispose of in its original form. A foam densifier significantly reduces its volume by converting it into compact, solid densified material, helping immediately reduce transportation, storage, and disposal costs.
Densification can also improve workplace efficiency and optimize storage space. In some regions, densified EPS may be used as a recyclable raw material; however, recycling options and requirements depend on local market conditions.
What is the difference between hot-melt and cold-press densification?
There are two common methods for densifying EPS: hot-melt densification, which uses heat to melt and densify the foam, and cold-press densification, which mechanically compresses it.
Hot-melt densification removes the air trapped within the foam more thoroughly, achieving greater volume reduction and improving transportation efficiency. For this reason, hot-melt densification is widely used in Japan.
Does thermal densification produce odors?
Our foam densifiers feature a built-in activated carbon filtration system designed to minimize odors generated during thermal densification. The level and perception of odor may vary depending on the material being processed, the installation environment, and ventilation conditions.
Does the machine consume a lot of electricity?
Our proprietary slit-heater design reduces actual heater-on time to approximately one-third to one-half of total operating time. Compared with conventional foam densifiers using band heaters, this design reduces power consumption and can help lower operating costs.
What is the densified material like when it is discharged?
The densified material is formed into a flat profile, automatically cut to length, and discharged from the machine. Its surface temperature is approximately 70°C (158°F), and it cools relatively quickly.
Each piece typically weighs approximately 1–6 kg (2.2–13.2 lb), making it easier to handle, transport, and store.
Note: Wear protective gloves when handling or transporting hot densified material.
Can the machine process materials other than EPS?
Yes. In addition to EPS (expanded polystyrene), the machine can process the following foam materials without changing machine settings:
・PSP – Polystyrene Paper Foam
・XPS – Extruded Polystyrene Foam
・EPE – Expanded Polyethylene
・EPP – Expanded Polypropylene
Processing suitability and operating conditions may vary depending on the material and operating environment. Please contact us to confirm compatibility for your specific application.
Does the densification process generate dust?
The shredding process takes place inside an enclosed hopper. Dust generated during shredding is therefore contained within the machine and is subsequently incorporated into the material during thermal densification.
This design helps minimize the release of dust into the surrounding work environment.
Can the densified material be sold?
Whether densified material can be sold, and at what price, depends on the local recycling market. We do not purchase densified material, but we can provide general information about recycling trends when appropriate.
Customers should contact local recyclers or material buyers to confirm acceptance requirements, pricing, and other transaction terms in their area.
Is the machine safe to operate?
The machine is designed with safety in mind and includes guards and safety devices around hazardous areas such as rotating components and cutting mechanisms.
Our equipment is developed based on Japanese safety design practices and incorporates features intended to support safe operation. Operators should always follow the operating manual, required safety procedures, and applicable local regulations.
Is the machine easy to operate?
Yes. The machine is designed for simple operation, with most functions controlled by push buttons. No specialized skills are required for basic operation, and operators can begin using the machine after appropriate training.
What are the advantages of a Japanese-made foam densifier?
EPS recycling has been practiced in Japan for more than 40 years, and foam densification equipment has continuously evolved through decades of real-world use.
Drawing on this experience, our foam densifiers are designed with an emphasis on durability, stable performance, and energy efficiency. Their reliability is backed by extensive use in demanding operating environments.
Can a foam densifier be used in areas without established recycling infrastructure?
Yes. Even where recycling infrastructure or markets are not yet well established, a foam densifier can provide immediate benefits by significantly reducing the volume of EPS.
This can improve transportation and storage efficiency and help reduce disposal costs, making densification beneficial even when local recycling options are limited.
Does installation require any special equipment?
In most cases, no special supporting equipment is required for installation. However, electrical requirements, installation space, and applicable local codes and regulations should be confirmed before installation.
We recommend reviewing site requirements in advance to ensure proper installation and operation.
Please wait a moment for the inquiry form to appear.
If the form does not appear after a short wait, please contact us here.
YAMAMOTO's long-selling standard model, trusted by businesses across a wide range of industries.
Delivers high processing capacity in a compact footprint while ensuring both operator safety and ease of use.