Processed at a relatively low temperature of 200°C (392°F), the densified material retains good material quality with minimal thermal degradation. It is formed into flat slabs with minimal warping or deterioration, making it easy to store and handle.
Dimensions: 200 × 1,000 × 50 mm (7.9 × 39.4 × 2.0 in.)
Cut length can be adjusted as needed.
Weight: Approx. 6 kg (13.2 lb) each
Pallet Weight: Approx. 600 kg (1,323 lb) per pallet when stacked 5 × 20 layers
Foam Densifiers RE-E1000
A compact, high-capacity
densifier engineered for safe,
efficient, and easy operation.

Designed for high-quality output,
operator safety, and everyday ease of use.
![]()
Foam is melted using an electric heater, reducing its volume by up to approximately 100:1.
Densification ratio varies depending on the expansion ratio of the material.
![]()
Densified material (Ingot) is automatically cut to a preset length for easier handling and storage.
![]()
The built-in air cooling and water circulation system cools the densified materials inside the machine, eliminating the need for separate cooling after discharge.
![]()
With a warm-up time of just 15 minutes, operators can get to work quickly.
![]()
A compact heat source and activated carbon odor filtration help minimize odors and maintain a more comfortable working environment.
![]()
Hazardous areas are guarded to prevent operator access. Safety interlocks stop the machine and prevent operation when access covers are open.
Widely used for protective packaging, fish boxes, insulation, and cushioning applications.
Commonly used for food trays, takeout containers, and disposable food packaging.
Used primarily as rigid insulation boards for residential and commercial buildings.
A durable, lightweight foam used for automotive components, reusable packaging, and impact protection.
A flexible foam material widely used for protective packaging, cushioning, and industrial applications.
Interested in
the RE-E1000 Foam Densifier?
Contact Us to Learn More.
The RE-E1000 combines high processing capacity
with a compact design, operator safety, and ease of use.
If you're looking for an efficient solution
for high-volume foam waste,
contact us to learn how the RE-E1000 can help.
![]()
Densifying foam by up to 100:1 significantly reduces storage and transportation costs.
It can also eliminate the cost of outsourcing foam waste disposal. Depending on the volume and type of foam processed, the value of the densified material may even offset operating costs.
![]()
Simple push-button controls make the machine easy to operate. Densified material (Ingot) is automatically formed and cut to a consistent size, allowing operators of varying experience levels to use the machine with ease.
![]()
With a warm-up time of just 15 minutes, operators can get to work quickly. An activated carbon odor filtration system helps maintain a comfortable work environment, while easy access to heaters and other key components simplifies routine maintenance.
Beyond material quality and machine performance,
we design our equipment with the operator
in mind—making everyday operation safer,
easier, and more comfortable.
Simple push-button controls make everyday operation easy and straightforward. Densified material (Ingot) is automatically formed and cut to a consistent size, making the machine easy for anyone to operate.
With a warm-up time of just 15 minutes, operators can get to work quickly after startup or breaks. An optional automatic material distribution system helps reduce operator workload by distributing the material evenly.
A compact heat source helps minimize heat, while an activated carbon odor filtration system helps reduce odors. Sound-absorbing material in the shredder hopper also helps reduce noise, creating a more comfortable work environment.
We strive to make a positive impact
on the recycling industry through engineering.
This commitment guides the development of every YAMAMOTO
recycling machine,
built around three core principles.
Interested in
the RE-E1000 Foam Densifier?
Contact Us to Learn More.
The RE-E1000 combines high processing capacity
with a compact design, operator safety, and ease of use.
If you're looking for an efficient solution
for high-volume foam waste,
contact us to learn how the RE-E1000 can help.
The RE-E1000 delivers a processing capacity of 100 kg/h (220 lb/h)
while maintaining a space-efficient footprint.
Designed for safe and comfortable operation.
Click each component to view details.
1
The feed hopper features a 1,000 mm (39.4 in.)-wide loading opening and corrosion-resistant stainless steel construction. Sound-absorbing material helps significantly reduce operating noise.
2
YAMAMOTO’s uniquely designed shredder blades efficiently shred a wide range of EPS products, including fish boxes, protective packaging, and trays.
3
Ready in just 15 minutes. Densification at 200°C (392°F) with minimal heat exposure helps reduce thermal degradation and maintain material quality.
4
Melted EPS from the heater is compressed by forming rollers and a forming plate, then air- and water-cooled to produce uniform densified slabs. The water circulates in a closed-loop system, eliminating the need for drainage.
5
A wheel sensor monitors the discharge of the densified material, and the cutting blade automatically cuts it to a preset length (400, 600, 800, or 1,000 mm / 15.7, 23.6, 31.5, or 39.4 in.).
6
Activated carbon filtration helps reduce odors generated during densification, creating a more comfortable work environment.
7
Provides precise temperature control. If an issue occurs, a warning light and audible alarm alert the operator, while a message on the display indicates the issue.
8
A manual control switch inside the panel allows individual motors to be operated independently during maintenance.
Interested in
the RE-E1000 Foam Densifier?
Contact Us to Learn More.
The RE-E1000 combines high processing capacity
with a compact design, operator safety, and ease of use.
If you're looking for an efficient solution
for high-volume foam waste,
contact us to learn how the RE-E1000 can help.

RE-E1000

| Product | Foam Densifier | ||
|---|---|---|---|
| Model | RE-E1000B | RE-E1000R | |
| Description | Belt Conveyor Type | Roller Conveyor Type | |
| Machine Dimensions |
Length | 3,502 mm (137.9 in.) | 3,502 mm (137.9 in.) |
| Width | 4,387 mm (172.7 in.) | 2,417 mm (95.2 in.) | |
| Height | 2,175 mm (85.6 in.) | 2,178 mm (85.7 in.) | |
| Machine Weight | 3,200 kg (7,055 lb) | 3,000 kg (6,614 lb) | |
| Power Requirement | 30.11kW | 29.91kW | |
| Processing Capacity | 100 kg/h (220 lb/h) | ||
| Densification Method | Electric Heating | ||
| Compatible Materials | EPS, PSP, XPS, EPP, EPE | ||
| Odor Control | Activated Carbon Filtration | ||
● Processing capacity varies depending on the material and foam expansion ratio.
● Processing capacity may differ from the specifications shown above when processing high-expansion foam, trays, or wet materials. Please contact us for details.
● Specifications, illustrations, appearance, colors, markings, and other details are subject to change without notice for product improvements.
What are the benefits of densifying expanded polystyrene (EPS)?
EPS is lightweight but bulky, making it inefficient to transport and costly to store and dispose of in its original form. A foam densifier significantly reduces its volume by converting it into compact, solid densified material, helping immediately reduce transportation, storage, and disposal costs.
Densification can also improve workplace efficiency and optimize storage space. In some regions, densified EPS may be used as a recyclable raw material; however, recycling options and requirements depend on local market conditions.
What is the difference between hot-melt and cold-press densification?
There are two common methods for densifying EPS: hot-melt densification, which uses heat to melt and densify the foam, and cold-press densification, which mechanically compresses it.
Hot-melt densification removes the air trapped within the foam more thoroughly, achieving greater volume reduction and improving transportation efficiency. For this reason, hot-melt densification is widely used in Japan.
Does thermal densification produce odors?
Our foam densifiers feature a built-in activated carbon filtration system designed to minimize odors generated during thermal densification. The level and perception of odor may vary depending on the material being processed, the installation environment, and ventilation conditions.
Does the machine consume a lot of electricity?
Our proprietary slit-heater design reduces actual heater-on time to approximately one-third to one-half of total operating time. Compared with conventional foam densifiers using band heaters, this design reduces power consumption and can help lower operating costs.
What is the densified material like when it is discharged?
The densified material is formed into a flat profile, automatically cut to length, and discharged from the machine. Its surface temperature is approximately 70°C (158°F), and it cools relatively quickly.
Each piece typically weighs approximately 1–6 kg (2.2–13.2 lb), making it easier to handle, transport, and store.
Note: Wear protective gloves when handling or transporting hot densified material.
Can the machine process materials other than EPS?
Yes. In addition to EPS (expanded polystyrene), the machine can process the following foam materials without changing machine settings:
・PSP – Polystyrene Paper Foam
・XPS – Extruded Polystyrene Foam
・EPE – Expanded Polyethylene
・EPP – Expanded Polypropylene
Processing suitability and operating conditions may vary depending on the material and operating environment. Please contact us to confirm compatibility for your specific application.
Does the densification process generate dust?
The shredding process takes place inside an enclosed hopper. Dust generated during shredding is therefore contained within the machine and is subsequently incorporated into the material during thermal densification.
This design helps minimize the release of dust into the surrounding work environment.
Can the densified material be sold?
Whether densified material can be sold, and at what price, depends on the local recycling market. We do not purchase densified material, but we can provide general information about recycling trends when appropriate.
Customers should contact local recyclers or material buyers to confirm acceptance requirements, pricing, and other transaction terms in their area.
Is the machine safe to operate?
The machine is designed with safety in mind and includes guards and safety devices around hazardous areas such as rotating components and cutting mechanisms.
Our equipment is developed based on Japanese safety design practices and incorporates features intended to support safe operation. Operators should always follow the operating manual, required safety procedures, and applicable local regulations.
Is the machine easy to operate?
Yes. The machine is designed for simple operation, with most functions controlled by push buttons. No specialized skills are required for basic operation, and operators can begin using the machine after appropriate training.
What are the advantages of a Japanese-made foam densifier?
EPS recycling has been practiced in Japan for more than 40 years, and foam densification equipment has continuously evolved through decades of real-world use.
Drawing on this experience, our foam densifiers are designed with an emphasis on durability, stable performance, and energy efficiency. Their reliability is backed by extensive use in demanding operating environments.
Can a foam densifier be used in areas without established recycling infrastructure?
Yes. Even where recycling infrastructure or markets are not yet well established, a foam densifier can provide immediate benefits by significantly reducing the volume of EPS.
This can improve transportation and storage efficiency and help reduce disposal costs, making densification beneficial even when local recycling options are limited.
Does installation require any special equipment?
In most cases, no special supporting equipment is required for installation. However, electrical requirements, installation space, and applicable local codes and regulations should be confirmed before installation.
We recommend reviewing site requirements in advance to ensure proper installation and operation.
Please wait a moment for the inquiry form to appear.
If the form does not appear after a short wait, please contact us here.
Ideal for in-house EPS recycling.
A compact, energy-efficient densifier designed for small-scale operations.
YAMAMOTO's long-selling standard model, trusted by businesses across a wide range of industries.