Upgrading to a Foam Densifier with Automatic Forming and Cutting Reduces Operator Workload and Improves Densified Material Quality
Application
Industry: Recycling
Product: Foam Densifiers
Model: RE-E1000A/1500
Country: Japan

Based in Aomori Prefecture, Japan, the company processes approximately 15 metric tons (33,100 lb) of EPS foam per month, primarily fish boxes and packaging materials generated by food supermarkets and other businesses. The company previously used a Foam Densifier from another manufacturer. With that machine, operators had to cool the densified materials (ingots) collected in boxes, remove them manually, and stack them on pallets. This required considerable time and labor. In addition, the work area became extremely hot because the discharge section had to be opened to remove the densified materials (ingots), raising concerns about both heat and odors.
To address these issues, the company first installed a YAMAMOTO RE-E502 Foam Densifier. Its wide hopper made material feeding easier, while the automatic forming and cutting of densified materials (ingots) significantly reduced the workload on operators. However, with a processing capacity of 50 kg/h (110 lb/h), the RE-E502 did not provide sufficient capacity for the large volume of EPS foam handled by the company. This led to longer operating hours and became a challenge during busy periods.
The company therefore decided to install the larger YAMAMOTO RE-E1000A Foam Densifier with a separate shredder. With the independent shredder providing higher processing capacity, the Foam Densifier can process up to 100 kg/h (220 lb/h), significantly reducing processing time.
A company representative commented, “We operate the machine almost every day, but the time operators spend on the work has been significantly reduced, and it has been running reliably without any major problems. The function monitor also allows us to check the production volume of densified materials (ingots) and operating hours, making the machine even more convenient to use. The quality of the densified materials (ingots) is also high, and we have received positive feedback from the company that purchases them.”

