Upgrading to an Electrically Heated Densifier Capable of Processing XPS Helps Reduce Costs
Application
Industry: Waste Management
Product: Foam Densifiers
Model: RE-E1000
Country: Japan

With a vision of “nurturing a beautiful community while preserving valuable resources for future generations,” the company operates a wide range of businesses in Miyagi Prefecture, including general waste and industrial waste collection and transportation, recycling, and industrial waste intermediate processing. The company collects approximately 20,000 m3 (706,000 ft3) of EPS foam annually from various locations across the prefecture, equivalent to about 100 metric tons (220,000 lb) by weight. Most of the material consists of packaging from home appliances.
The company had previously been using an oil-fired foam densifier from another manufacturer. However, rising fuel, electricity, and water costs - including water used to cool the densified materials (ingots) - had become a major concern. The oil burner also required approximately one hour of warm-up time before operation, resulting in long waiting times for operators. In addition, the previous machine was unable to densify XPS, creating higher outsourcing costs for processing this material.
To address these issues, the company decided to upgrade to YAMAMOTO’s electrically heated RE-E1000 Foam Densifier. The goal was to reduce operating costs and improve the working environment.
Approximately one year after installation (as of August 2024), a company representative highlighted several benefits of the new machine. Running costs were reduced by approximately 60%, and the ability to densify XPS and EPE in-house eliminated the need to outsource their processing. Because the RE-E1000 uses an electric heating system rather than an oil burner, there is almost no noticeable increase in workplace temperature during operation, and odors during densification have also been reduced, resulting in a much more comfortable working environment.



